We are Worldwide Distributors of the strontium aluminate glow in the dark powder & pigment. Our glow powders and glow paints are the brightest on the market! This site is full of glowing project ideas using our mega glow in the dark paints. Instructions on how to make glow in the dark paint,glow nails, glowing concrete,glow in the dark stars,glow lures, glow in the dark gun sights, glow fishing, glow art,glow pigment,luminescent paint,glowing murals and more!
** CALL US TOLL FREE 1-888-656-9229
  Loading... Please wait...

Popular Brands

Our Newsletter


Restoring Glow watch

 

 

 watch1.bmp

RESTORING LUMINOUS WATCH HANDS

Submitted by:
Materials Required:
Procedure:
The first stage in the operation is to remove the hands from the watch and clean out the old luminous material. Take the necessary precautions if the old material is radioactive such as radium, tritium, etc. A sharpened piece of peg wood is perfect for cleaning out the hands without marring them.
watch2.bmp

 

 

An easy way to deal with the hands, which can be quite small items, is to prepare holders for them out of peg wood whittled to an appropriate thickness. This allows you to manipulate the hand without touching it. The peg wood holder can also be held upright in a blob of rodico, a clothes peg, a hole in the desk, etc, whilst the luminous paint is drying. Note that the back side (underneath) of the hand is positioned to the top as this is the side to which the luminous paint is applied.

The pic below demonstrates the method of application of the luminous paint, and shows the hand on the peg wood holder.

 
 
 
watch3.bmp

This series of pics illustrates the method of application. The applicator, in this instance a large watch oiler, is loaded with paint and then, in a smooth motion, is drawn across the hand. The paint forms a film across the back of the hand. To ensure a complete coverage the tip of the applicator should be kept away from the hand aperture.

watch5.bmp

 

  

This particular luminous paint has a very thin consistency and therefore required multiple applications to build up a sufficient thickness. It is important to ensure that there is not too much build up of paint on the underside of the hand as it may interfere with the hand clearance once mounted back on the watch.

Below are before and after pics of the hands on the Bulova.

 

As can be seen, this paint is a pale green colour, as opposed to the bright green of other available paints. I feel it produces an attractive, subdued look, suitable for vintage watches. The luminous material is light activated, and the glow is reasonably long lasting, and indeed, glows as green as any other in the dark, as the pic below demonstrates