GENERAL INFORMATION

Depending on use and sun exposure, light fastness on some colors will be limited. The glow effect continues even if the color fades. Green Glow powder  will provide the best glow and color retention when applied over a white base. Use

1. BASE COAT
Maximum glow occurs when our Glow in the dark powder is applied over a white base.  Other colors/bases (such as Pearls, Kandys, Neons, Solid Kolors, etc.) may be used for unusual effects, but glow time will be less.

2. MIXING
Add 4 to 6 oz. of Glow Powder dry powder to 1 pint of ready to spray clear. Mix thoroughly. Mix only when ready to use. Stir between coats as setting occurs quickly. Spray immediately after mixing as this product may not store well when mixed.
NOTE: An agitator cup can help keep product mixed during spraying.
Use with Urethane Finishes.

Top Coats.

For Lacquer Finishes,

3. APPLYING  Glow powder

Apply 3 coats using a 75% pattern overlap when spraying. Allow plenty of flash time between coats. Clear with a compatible clear. For best glow time, apply over a white base.

4. GLOW TIME
Glow time will vary based on application, base color and light exposure. Maximum glow time for green is 8-12 hours