Glowing Car Paint
Submitted by:
unknown
Materials Required:
Vehicle, paints, glow paints, gloves, spray gun
Procedure:
General Information:
Depending on use and sun exposure, light fastness on
some colors will be limited. The glow effect continues even if the color fades. Green Glow powder
will provide the best glow and color retention when applied over a white base.
1. BASE
COAT
Maximum glow occurs when our Glow in the dark powder is applied over a white base. Other
colors/bases (such as Pearls, Kandys, Neons, Solid Kolors, etc.) may be used for unusual effects,
but glow time will be less.
2. MIXING
Add 4 to 6 oz. of Glow Powder dry powder to 1
pint of ready to spray clear. Mix thoroughly. Mix only when ready to use. Stir between coats as
setting occurs quickly. Spray immediately after mixing as this product may not store well when
mixed. NOTE: An agitator cup can help keep product mixed during spraying. Use with Urethane
Finishes.
Top Coats.
For Lacquer Finishes,
3. APPLICATION
Apply 3 coats
using a 75% pattern overlap when spraying. Allow plenty of flash time between coats. Clear with
a compatible clear. For best glow time, apply over a white base.
4. GLOW TIME
Glow time
will vary based on application, base color and light exposure. Maximum glow time for green is
8-12 hours.
Ready Set Glo's Comments:
If you have done any projects or have ideas that make effective use of glow products ( Luminous
paints, Luminous powders, Luminous gels, Luminous stickers or Luminous Master Pellets ), please
do not hesitate to write in to us at: projects@readysetglo.com or quite simply click here.
We accept any project or easily implementable ideas that uses glow paints, glow powder, glow gel or
Glow Master Pellets
Remember, if we accept your glow paints, glow poweder, glow gel or Glow Master Pellet projects, you will
receive a small gift of free glow powder or glow paint from us as a token of our appreciation.
Do not forget to mention your full name, address and phone number!
